STONEPOXY

Parts (concrete, natural stone) to be bonded or filled must be clean, completely dry and free of dust. Mix the two components in the ratio of 3 parts component "A" + 1 part component "B" using a drill with stirrer, taking care to mix the two components uniformly. Spread the
mixture with a notched trowel or float on the surface to be bonded (tile or slab) and then lay on the floor or wall.
The prepared mixture has a workability (30-35 minutes at 20 ° C) that will be longer in the presence of a lower ambient temperature, shorter in the presence of higher temperature. Complete curing of the mastic occurs after 7-8 days.

Suggestion for use and recommendations:

• Never catalyze a whole can of putty in a time to prevent the mass effect which accelerates the hardening of the product.
• Avoid the use of mastic at a temperature below 10°C, since reaction times and hardening becomes longer.
• Air humidity can change reaction time, therefore it is not advisable to apply the product in environments with strong moisture.
• Use of the catalyst in amounts different from prescribed the mixing ratio may delay or not to trigger curing.
• Before use read the recommendations printed on the label and always carry out a preliminary test.

(*)indicative values relating to the hardened resin object of laboratory tests